|
IRMCO is known for inventing and innovating high performance lubricants and we have also developed a world class expertise in lubricant logistics, mixing and application. No other lubricant company in the world is focused on just metal forming with oil free lubricants, except us.
What's key here is that we believe more is in fact not better. We don't use more to cover up poor performance or waste product to boost sales. We believe controlled application with the proper delivery equipment is the right thing to do.
IRMCO designs, sources, programs and monitors automated fluid delivery, storage and application systems. Bulk fluid inventory is also measured 24/7 via a remote monitoring system to insure proper inventory levels. We engineer both roll coater and spray systems or a combination of both. We work with the best equipment companies to produce the most efficient engineered solutions.
Let us help you.
On average, a tube bender uses a significant amount of lube per bend on a car exhaust tube resulting in waste and a messy environment
Focusing on the correct production technology and application for mandrel bending results in an average of 75% savings and a cleaner workplace for IRMCO customers.
SPRAY
Pinpoint application of IRMCO FLUIDS is optimal and our recommended spray technology will help you utilize the fluid technology to its fullest extent.
ROLL
Employing our recommended roll technology into your operation will result in a thin film application of IRMCO FLUIDS for better tool protection and reduced usage.
MIX
Mixing of IRMCO FLUIDS on site is recommended and these automated systems will make it easy and reliable. Systems from simple batch mixing to full turnkey mixing (up to three separate dilutions and/or products) and distribution press side are available.
USAGE MONITORING
How much lube are you using per shift? Per press? Per Part? Our methods and monitors can help you determine how much you are using now and later to determine the impact on your cost per piece.
BEND
A thin film of IRMCO GEL or IRMCO EXTREME is all you need when bending various tubes. Our IRMCO GEL and IRMCO EXTREME specifically designed application systems will allow you to utilize your CNC bender controls and give reliable and metered distribution to each bend even in multiple stack benders.
TM 'Rips, tears and wrinkles' used by permission of Mr. Art Hedrick.
Disclaimer © 2011 IRMCO Products, articles, news releases, case studies, technical papers
