Project Scope
Replace competitive, highly viscous, synthetic stamping fluid that generated 40% scrap on deep drawn enameling steel sinks.

IRMCO replaced the competitive fluid with a low viscosity, easy to apply fully synthetic stamping fluid that eliminated the scrap and was easy to clean.


  • Eliminated excessive scrap.
  • Provided an easier to mix & apply stamping lubricant.
  • Lower viscosity fluid improved ease of cleaning, reducing cleaning defects.

I-F Enameling Steel – Dry coil – 0.054” (1.37mm) thickness.

Product Used
IRMCO FLUIDS® 146-00N – 4:1 ratio (20%).

Ask an Expert